復合塑料袋制版需要幾支版怎么看

來源：http://m.lusp7.com/ 日期：2024-12-14

　　復合塑料袋制版需要根據袋子的顏色和尺寸來決定制版數量。以下是制版的基本規則：

　　The number of plate making for composite plastic bags needs to be determined based on the color and size of the bags. The following are the basic rules for plate making:

　　制版數量 ：

　　Number of plate making:

　　一個顏色通常需要一個版。

　　A color usually requires one version.

　　如果袋子有五種顏色，則需要五支版。

　　If the bag has five colors, then five versions are required.

　　版費計算 ：

　　Version fee calculation:

　　版費通常是根據制版數量來收取的。

　　The plate fee is usually charged based on the number of plates made.

　　顏色越多，版費越高。

　　The more colors there are, the higher the plate fee.

　　尺寸考慮 ：

　　Size considerations:

　　對于OPP膠袋，制版時考慮的是袋子的周長和長度。

　　For OPP plastic bags, the circumference and length of the bag are considered during plate making.

　　周長計算公式為：周長 = 2 × （長度 + 寬度）。

　　The formula for calculating circumference is: circumference=2 × (length+width).

　　對于寬度為48cm的袋子，制版時寬度需要考慮為48cm，長度為袋子實際長度，但小周長限度為36cm。

　　For a bag with a width of 48cm, the width needs to be considered as 48cm during plate making, and the length should be the actual length of the bag, but the minimum circumference limit is 36cm.

　　特殊情況 ：

　　exceptional case:

　　如果袋子兩面都有印刷，版費計算需要考慮袋子的寬度乘以2。

　　If both sides of the bag have printing, the plate fee calculation needs to consider multiplying the width of the bag by 2.

　　對于復雜圖案，如人像，可能只需要4個CMYK印刷版，但大色塊可能還需要使用專色版。

　　For complex patterns such as portraits, only 4 CMYK printing plates may be required, but for large color blocks, spot color plates may also be needed.

　　錯誤制版 ：

　　Incorrect plate making:

　　如果制版后發現圖案或文字有錯誤，需要重新制版。

　　If errors are found in the pattern or text after plate making, a new plate needs to be made.

　　每換一個版就要收取一支版的費用。

　　A fee will be charged for each version change.

　　制版費用和數量會根據具體情況有所不同，建議在印刷前仔細確定好圖案和文字，以避免制版錯誤帶來的額外成本。

　　The cost and quantity of plate making may vary depending on the specific situation. It is recommended to carefully determine the pattern and text before printing to avoid additional costs caused by plate making errors.

　　本文由 濟南復合塑料袋  友情奉獻.更多有關的知識請點擊  http://m.lusp7.com   真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Jinan Composite Plastic Bag For more related knowledge, please click http://m.lusp7.com Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.